sprd_con.htm

PAVING PLANT & PROCESSES (1988) LTD.
QUALITY - INGENUITY - COMMITMENT
5 Heb Place, Takanini, Auckland, New Zealand
Phone: (649)-266-0168 Fax: (649)-266-0169
Email: www.sales@paving-plant.com

AGGREGATE ROLLER SPREADERS

Can be fitted to any truck with little or no modification.

Simple hydraulic change-over available in hoist circuit.

May be operated from drivers cab, controls along the spreader side or by a hand held remote.

Suitable for all types of sealing chips and grit.

Operates with coated chip with the same accuracy as with uncoated chip.

Rate of spread is proportioned to the truck engine speed, therefore variations of spreading rate due to truck speed variations are virtually eliminated.

The spread width is easily controlled by adjustable cut-off plates.

RADIO FREQUENCY REMOTE CONTROL FOR ROLLER SPREADERS
Occupational Health & Safety is very important these days and Roading Contractors do not need to be at risk of potential accidents caused by employees operating equipment at the back of the chipping trucks. The new Aggregate Spreader Remote Control unit by Paving Plant & Processes eliminates that risk.

The Control Unit is a wireless radio frequency device allowing control of the spreader from up to a 9 meter distance.

Each transmitter and receiver pair may be assigned a signature code to prevent accidental operation of another spreader where more than 1 remote control is used on a site. Additionally the codes may easily be field changed to use with a spare remote in case it is lost or damaged.

Control of up to 8 gates,
Variable adjustment of the application rate control dam,
Taper gates in and out from either side of the spreader,
Ability to set for wheel tracks if desired,
Manual control switches on the spreader unit,
Selectable codes to individualize the fleet, or to change a remote in case of loss or damage.

For further information Click Here