PAVING PLANT & PROCESSES (1988) LTD.
QUALITY - INGENUITY - COMMITMENT
5 Heb Place, Takanini, Auckland, New Zealand
Phone: (649)-266-0168 Fax: (649)-266-0169

Bitumen Sprayers designed to meet your specifications and requirements.


We have the knowledge and experience to advise

you on what most suits the work that you do.

 


13,000 Liter Tank on International Chassis

 
1000 Liter Bitumen Sprayers
2000 - 6000 Liter Bitumen Sprayers
8000 - 13,000 Liter Bitumen Sprayers

Dual Use and Combination Sprayers
Small Emulsion Sprayers
Aggregate Roller Spreaders
Application Rate Controls

1000 LITER BITUMEN SPRAYERS

The TS1000 Bitumen Sprayer is a reliable, efficient and easy machine to use. The quality of design incorporated into each machine gives it a long and useful life in the most rugged of environments. Over 300 of these machines have been produced, many of which were used by local councils for street maintenance and small scale work.
 
Combinations of options are available to make this model range suitable for most small operations.

  • Bitumen Application Rate Control by pump and road speed.

  • Application by Hand Lance, Spray Bar of up to 13 nozzle width.

  • Steel welded tank construction with 100mm high quality fibreglass insulation.

  • Tank is hermetically sealed in glass reinforced black plastic sheathing for a hard wearing, corrosion and rust resistant body. Accidental damage is easy to repair.

  • All pipework is internal to ensure that the product is always pumpable.

  • Tank heating may be by diesel or gas burner with electric elements while at the depot.

Top of Page

 

2,000 to 6,000 LITRE BITUMEN SPRAYERS

An ideal mid range size of sprayers for medium size contracts.


  • Designed to meet international specifications

  • Skid mounted to the tray of a truck or permanently fixed to the truck chassis.

  • Internal tank baffles reduce bitumen surging for better load stability,

  • Fibreglass insulation round tank, high temperature insulation round the flame tube .

  • Bitumen Pump Internally mounted 50mm or 75mm positive displacement pump.

  • The bitumen pump is driven by a diesel engine through a Vee Belt drive.

  • Auxiliary Engine for use with standard pump drive.

  • Two control valves, a two position valve for bitumen pump or suck operation and a three position valve for gang bar, recirculate of hand lance operation.

  • 2.4M (24 nozzle) to 4.0M (40 nozzle) wide fully recirculating gang bar to eliminate blockages through plugs of cold bitumen. Each nozzle has its own valve to enable the spray width to be easily adjusted at will by lifting arms on the valves.

  • Choice of Application Rate Control. Manual with spray chart, microprocessor application rate indicator or fully automatic computer control. All systems are designed for accuracy and ease of use.

Top of Page
 

10,000 to 13,000 LITRE BITUMEN SPRAYERS

  • A chassis mounted tank of 8,000 to 13,000 Liters which is designed to meet or exceed all Bitumen Transport and Dangerous Goods requirements.

  • Fully welded, mild steel construction. Access hatch roll-over protection available. Full width catwalk and handrail for safety.

  • A minimum of 100 mm of high quality fibreglass insulation with high temperature insulation installed around the flame tube flue. Choice of polished aluminum or black fibre glass cladding.

  • Long lasting, 80 mm universal positive displacesment, gear type pump, in cast iron construction.

  • The pump is driven by a fixed displacement hydraulic motor with options of Truck "Live Drive" or auxilliary diesel engine power source.

  • Standard 4000 mm 41 nozzle, fully recirculating spray bar. Spray bar width options to 8 Metres with reverse horizontal or automatically vertical folding extensions.

  • Spray bar or extensions may be fitted with computer controlled, fast response actuators for individual nozzle control where spray tapering may be desired.

  • Spray bar may be hydraulically raised, lowered or tilted during spraying.

  • Standard tank includes a single pass flame tube and flue for burner heating with a choice of LP gas, or high capacity diesel/electric burner.

  • Uniform density electric heating various options for control and power source.

  • Unique patented solid state electronic control system for accurate and easy to use bitumen application rate control.


Top of Page
Feedback or Enquiries
Home | Company Profile | Asphalt Plants | Road Base Plant | Bitumen Shipping Containers | Automatic Controls | Road Maintenance

 
Updated 05/04